Comments

26 Juli 2012

Canon Printer Repair Manuals - Problem and Solution

Posted by at 12.55 Read our previous post
Some Common Problem and Solutions on Canon Printer
Printer Canon brand is still the favorite and is widely used everywhere.


Besides the price is relatively cheap (for the entry level), the print is pretty good too refills are not complicated. Well, if you are loyal users of Canon printer, and having some problems with your printer on this one. Listen wrote several common diseases that often occurs in the following Canon Printers.

A. Blinking, blinking indicator when the printer is turned on

Usually this happen on Canon iP1200, iP1300, iP1600, iP1700, i255

The solution
, this solution must you do every time you turn on the printer, because this step is temporary.
When your printer is disconnected from the electricity, then the blinking will appear again. this way better for you if you are not familiar with ways to reset the printer using the software.
Please follow this steps
1. Unplug the power cable from your printer.
2. Press and hold the Power button while you plug the power cable.
3. The power indicator light will appear yellow.
4. Release the power button, when you have finished installing the power cable.
5. Then press the power button to turn on your printer.
6. Ensure your printer is not blinking anymore. But when your printer is disconnected from the electricity, then the blinking will appear, and you just repeat the above steps.

B. Blinking light, when running out of ink, or when finished filling out the ink

Usually this occurs on Canon iP 1880 printer, when the ink runs out or when you are finished filling out the ink. even the ink is still filled, Solution:
Please follow this steps
1. Press and hold down the "Resume" for about 1 to 2 minutes
2. Then open the lid or cover of your printer.
3. Open the cartridge and plug it again
4. Close the printer cover
5. Turn off then turn on again

C. Print the letter dashed (striped)

Try to cleaning a few times, if this does not work well, wash your catrige manually. But, the best solution, based on the experience of some users, you must change your printer Catrige.

D. Problem "ink absorber is full" on Canon IP1700 and IP1200
Please follow this steps
1. Turn off the printer and unplug the power cable
2. Press and hold the power button (not released) while then plug the power cable
3. When the power button is pressed and the power cable is plugged back, press the resume button twice (in succession)
4. Release the power button

Now your computer will detect a new printer, just follow the instruction on your monitor until complete.

E. Problem “The waste ink absorber is almost full” dan “ink absorber is Full” on Canon IP3000 dan IP2000
Please follow this steps
1. Turn off the printer
2. Press the reset button then press the power button
3. Press and hold the power button then release the reset button 4. Press the resume button 2 times then release both buttons (the reset button and power button)
5. would appear the green indicator
6. When indicator is green, then press the resume button 4 times
7. Press the power button (turn off), if printer not turn off press the power button again
Supported by Android App Download! ©2012 Ramnul All Content Copyrighted and may not reproduced on other website